With industrial-grade precision and reliability in a machine compact enough to sit on your desk, the M3-ID Rev. 1 is built for prototyping and production of end-use parts. With material capabilities ranging from ABS and nylon to polycarbonate and polypropylene, MakerGear’s open material compatibility offers top-grade performance at a significantly lower cost-per-part.
The M3-ID Rev. 1 is the smarter, faster answer to FDM additive manufacturing. Now featuring a touch probe to ensure a seamless, plug-and-play printing experience, the M3-ID Rev. 1 excels at high volume print jobs and in low-volume, high mix environments.
M3-ID Rev. 1's are shipping with a 1 - 2 week lead time.
|Build Dimensions|| |
|Build Plate|| |
|Assisted Leveling||Yes - True-Leveling + Auto-Leveling|
|Filament Feed||Direct (non-Bowden).|
|Maximum Extruding Temperature||40 W heater and thermistor rated to 300 °C.|
|Hot End|| |
|Print technology||FFF (Fused Filament Fabrication)|
|X/Y Motion||Independent axes with high precision linear rails guiding motion driven by kevlar reinforced belts.|
|Z motion||10 mm rods guide motion driven by lead screw.|
|Layer Resolution|| |
|Print head travel speed||80-450 mm/sec|
|Ambient operation temperature||15 ˚C to 32 ˚C (59 ˚F to 90 ˚F)|
|Storage temperature||0 ˚C to 32 ˚C (32 ˚F to 90 ˚F)|
|Operating Sound||lower than 65 dBA|
|Machine Weight||13.5 kg (29.5 lbs)|
|Machine Dimensions with spool and full range of motion|| |
|shipping box dimensions|| |
|AC input||100 - 120 V (4 A)/220 - 240 V (2 A), 47 - 63 Hz|
|Power requirements||24 V DC @ 15 A|
|Power consumption||360 W max|
Wifi, LAN, USB