Parts List:
Laser Cut Wooden Parts
- Laser Cut Wooden Chassis parts A – I
- (5) Nylon Cable Retainers (includes extras)
- (2) Bags of 50 M3x10 Stainless Steel Socket Cap Screws
- (100) M3x9 Stainless Steel Fender Washers
- (100) M3 Square Nuts
These Frame Assembly photos are also available on the MakerGear Flickr page. The frame parts are labeled A - I.You may want to insert the square nuts into the frame pieces before assembly. You can use masking tape to hold in nuts that won't stay on their own.
You may need a razor or exacto blade to to remove any parts that were not completely lasered (as in the laser did not go all the way through the wood and the piece won't pop out). Do this carefully so that you don't break the piece and don't cut yourself.
Your Mosaic frame is now assembled. Move on the Step 2
