Mosaic Assembly Instructions

 

Tools: 

  • Razor blade or xacto knife
  • Pliers and/or Needle-nose Pliers
  • Scissors
  • Medium Slotted Screwdriver
  • Philips Head Screwdriver
  • 200 grit sandpaper (piece)
  • Superglue or wood glue
  • Wrench or Socket Set
  • Calipers

It is quite handy to sort your parts into a parts bin or something similar - so that you have easy access and they don't get knocked off the table or lost. Assembly photos are available on the MakerGear Flickr site. Some of the photos have additional information in the photo description. Note: the kit contains extra parts so unless you loose some pieces in the carpet you will not use all of the supplied parts.


Step 1: Assemble the Frame

Step 2: Assemble the Y Axis

Step 3: Assemble the X Axis

Step 4: Assemble the Z Axis

Step 5: Mount Extruder

Step 6: Build Platform

Step 7: Electronics

Step 8: Getting Started Guide (PDF)

Alternate instructions are available here including this very handy First Print Guide.