First, we start with 4″ × 4″ by 1/8" ceramic plate.

Then it goes into the laser where it gets branded and prepped for drilling.

Then, YOU work your mojo and put the kit together (details soon) to get this…

…and this

Put the pieces together. Puff out your chest. Print!


Black Acrylic build surface mounted on ceramic platform (use a clear or translucent surface to see the temperature strips)


Prototype glass build surface and ceramic platform mounted on modified Y carriage.

The heated platform/build surface attaches and detaches from the carriage just like a standard build platform but NO wire tether!! It’s designed to work with the heated platform firmware modifications, an external controller (we’ll have one soon) or just control it using G-code through the 12V Fan or Valve port on your extruder controller.

Print hard and prosper! (or something like that)